Category: Lab & Quality control

The Industrial Guide to Surface Energy and Dyne Testing

March 7, 2026 / 57

Surface Energy and Dyne Testing Guide: 105 Technical Questions for Printing and Converting January 26, 2026Kolorguide Technical Division Introduction Surface energy is one of the... Continue reading

Juan Rincon

Lot Number Traceability in Dyne Test Pens | Quality Control & ISO Compliance

February 18, 2026 / 146

Surface energy testing is a critical control point in printing, coating, laminating, and converting operations. Dyne test pens are routinely used to verify surface treatment... Continue reading

natalia

Corona treatment is not eternal and Why Geography is Killing Your Surface Tension (and Your Profits)

February 4, 2026 / 196

At Kolorguide, we live by one technical truth: “Corona treatment is not eternal; it is an unstable physical state that tends to decay.”Have you ever... Continue reading

natalia

¿Por que el Tratamiento de Corona no es Eterno? (Y por qué tu geografía importa)

February 2, 2026 / 178

En Kolorguide tenemos una máxima: “El tratamiento de corona no es eterno; es un estado físico inestable que tiende a desaparecer”. Muchos impresores se preguntan... Continue reading

natalia

Midalo: si no lo mide no sirve

February 2, 2026 / 226

No es solo Kolorguide: Las máximas autoridades de las Artes Gráficas lo exigen A veces nos preguntan si somos demasiado estrictos al insistir en que... Continue reading

natalia

Measure it: If you don’t measure it. it’s worthless

February 2, 2026 / 167

Is not just Kolorguide: The Graphic Arts Authorities Demand It We are often asked if we are being too strict by insisting that surface tension... Continue reading

natalia

Qué une lo visual, lo químico y lo normativo en la impresión de calidad?

January 29, 2026 / 149

Muchos impresores pasan horas ajustando ángulos de trama para evitar el Efecto Moiré (lo visual) o calibrando densitómetros para cumplir con la ISO 12647 (lo... Continue reading

natalia

The Journey of the Roll: Why Surface Tension in Origin is Never the Same at Your Press

January 28, 2026 / 176

In the graphic arts industry, there is a dangerous myth: believing that the technical data sheet of an OPP or Foil roll manufactured in Taiwan,... Continue reading

natalia

99 Consultas Frecuentes sobre Tensión Superficial: Un compendio técnico para evitar fallas de anclaje

January 26, 2026 / 235

Contenido por Temas Fundamentos de la Tensión Superficial Niveles de Dyne y Medición Tratamientos de Superficie (Corona, Plasma, Flame) Métodos de Prueba Fallas de Adhesión... Continue reading

natalia

Beyond Standard: Introducing Hi-Res Dyne Testing for Maximum Surface Precision

January 25, 2026 / 179

In an industry where high-performance films and complex ink formulations are the new standard, “close enough” is no longer an option. For years, the printing... Continue reading

natalia

Showing 1–10 of 62 posts

Category: Lab & Quality control

The Industrial Guide to Surface Energy and Dyne Testing

Lot Number Traceability in Dyne Test Pens | Quality Control & ISO Compliance

Corona treatment is not eternal and Why Geography is Killing Your Surface Tension (and Your Profits)

¿Por que el Tratamiento de Corona no es Eterno? (Y por qué tu geografía importa)

Midalo: si no lo mide no sirve

Measure it: If you don’t measure it. it’s worthless

Qué une lo visual, lo químico y lo normativo en la impresión de calidad?

The Journey of the Roll: Why Surface Tension in Origin is Never the Same at Your Press

99 Consultas Frecuentes sobre Tensión Superficial: Un compendio técnico para evitar fallas de anclaje

Beyond Standard: Introducing Hi-Res Dyne Testing for Maximum Surface Precision

Search

Recent Posts

Categories

COMPANY POLICIES

MENU

PAYMENT SECURITY